Professional Drone Battery Manufacturer: 25.2V 30000mAh Semi-Solid-State UAV Pack

As an experienced drone battery manufacturer, we engineered the OID9590190-30000-25.2V to meet the rigorous power demands of modern professional UAV platforms. This semi-solid-state Drone Battery pack combines high energy density with strong current delivery, giving industrial drone operators a dependable energy source for demanding missions.

The pack achieves approximately 320Wh/kg energy density and supports 5C continuous discharge with 10C burst current. For UAV integrators sourcing from a drone battery manufacturer, this means stable high-current output for heavy-lift motors, mapping payloads, and logistics platforms without unnecessary weight penalties.

Compared with conventional lithium packs, the semi-solid-state chemistry raises usable energy while retaining strong safety behavior and cycle stability. The result is a versatile Drone Battery solution for inspection drones, agricultural spraying UAVs, surveying and mapping aircraft, delivery drones, and surveillance platforms.

Key Advantages for UAV Integrators

Semi-Solid-State Lithium Chemistry

The advanced cell design delivers more usable energy than standard lithium batteries, helping extend flight endurance and improve mission efficiency.

High-Power Discharge Capability

Rated for 150A continuous discharge (5C) and 300A burst discharge (10C), the pack supports high-power UAV motors and aggressive flight profiles.

Lightweight Energy Density

At roughly 320Wh/kg, the battery reduces payload weight while increasing available endurance for professional drone operations.

Industrial-Grade Stability

Designed for wide temperature operation, this Drone Battery maintains dependable performance across challenging industrial UAV conditions.

Technical Specifications

Performance Characteristics

High-Rate Discharge Behavior

Under 5C discharge, the pack retains at least 90% of minimum capacity, supporting stable power delivery during high-demand UAV operations.

Temperature Performance

Discharge capacity varies by temperature as shown below.

Cycle Life

Under 1C charge and 3C discharge cycling, the battery keeps at least 80% capacity after 300 cycles.

Standard Test Conditions

Performance data is measured under controlled laboratory conditions:

• Temperature: 23±2°C
• Humidity: 45%–65% RH
• Atmospheric Pressure: 86–106 kPa

Charge method: 0.5C CC-CV charging to 29.4V with cut-off current 0.02C

Discharge method: 0.5C constant current discharge to 17.5V

Applications

This semi-solid-state Drone Battery pack suits:

• Industrial inspection drones
• Agricultural spraying UAVs
• Surveying and mapping drones
• Logistics and delivery drones
• Security and surveillance UAVs

Warranty

The warranty period is 6 months from the date of shipment.

Shenzhen Jianheng Technology Co Ltd will replace defective battery packs free of charge if failure is caused by material or manufacturing defects under proper operating conditions.

Storage Performance

Recommended long-term storage:

• Temperature: 25±3°C

• Humidity: ≤75% RH

• Recharge every 3 months

Safety Tests

The battery pack has passed multiple industrial safety tests:

• Vibration test (10–55Hz sweep)

• 1 meter drop test

• Short circuit protection test

• Overcharge test (3C to 32.2V)

• Forced discharge test

All tests confirmed:

No fire, no explosion, no leakage.

Storage and Transportation Requirements

Recommended transportation temperature:

23±2°C

State of charge during shipment:

3.60V – 3.85V per cell (25.2V – 26.95V pack voltage)

Humidity during storage:

≤75% RH

Safety Guidelines

To ensure safe operation:

• Do not short circuit battery terminals

• Do not disassemble or puncture the battery pack

• Use only specified chargers

• Do not expose to fire or extreme heat

• Do not immerse in water

• Stop using immediately if deformation, overheating, or unusual odor occurs

Improper handling may cause fire, explosion, or leakage.