-
Model NumberOID11122222-60000mAh-3.7V-3C-0102
-
Nominal Voltage3.7V
-
Typical Capacity60.5Ah
-
Maximum Discharge Current180A (3C)
-
Internal Impedance<2mΩ
-
Energy Density>400Wh/kg
-
Operating Temperature Discharge-20°C ~ 55°C
-
Cycle Life≥300 Cycles To 80% Initial Capacity
-
Place of OriginChina
-
Brand NameOID
-
CertificationUN38.3, MSDS
-
Model NumberOID11122222-60000mAh-3.7V-3C-0102
-
Minimum Order Quantity1pcs
-
PriceContact for best price
-
Packaging DetailsStandard export carton with individual cell insulation
-
Delivery Time15-20 working days
-
Payment TermsL/C,D/A,D/P,T/T
-
Supply Ability100000 units per month
Custom Drone Battery Pack — OID 60Ah 3.7V 3C High-Rate LiPo for UAVs
Built by Shenzhen Jianheng Technology Co Ltd, the OID series high-rate lithium polymer battery pack is an ideal custom drone battery pack for UAV platforms that demand high power density and dependable operation. Its typical capacity of 60.5Ah (59.5Ah minimum) and 180A (3C) maximum continuous discharge support long-endurance missions and high-thrust maneuvers. With internal resistance below 2mΩ, the pack keeps voltage sag and heat generation low, while energy density above 400Wh/kg helps reduce takeoff weight for aerial power systems.
- Energy density above 400Wh/kg supports longer flight time and lower payload burden
- Internal resistance below 2mΩ enables efficient power delivery with minimal heat loss
- 3C (180A) high-rate discharge suits aggressive throttle response and heavy-lift operations
- Operating range from -20°C to 55°C supports deployment in varied weather conditions
- Cycle life of at least 300 cycles to 80% capacity helps lower total cost of ownership
- Capacity retention of at least 90% after 28 days at room temperature supports shelf life
- UN38.3 and MSDS compliance supports safe air transport and international logistics
- Precise tab dimensions and sealed construction support reliable connections against vibration
Supplier: Shenzhen Jianheng Technology Co Ltd Brand: OID Place of Origin: China Certifications: UN38.3, MSDS Minimum Order Quantity (MOQ): 1 piece Supply Ability: 100,000 units per month Packaging: Standard export carton with individual cell insulation Delivery Port: Shenzhen, China Delivery Time: 15-20 working days after order confirmation Payment Methods: T/T, L/C, Western Union Price: Please contact our sales team for competitive pricing based on order volume
For technical inquiries or custom battery solutions, contact us at: Email: alan@liion-batt.com Phone: 0086 137 2555 9416 Address: 20F 2# Bld. Zhenhuan Rd. Pingshan, Shenzhen, China
| Parameter | Value |
|---|---|
| Model Number | OID11122222-60000mAh-3.7V-3C-0102 |
| Typical Capacity | 60.5Ah (60500mAh) |
| Minimum Capacity | 59.5Ah (59500mAh) |
| Nominal Voltage | 3.7V |
| Charge End Voltage | 4.25V |
| Discharge End Voltage | 2.5V |
| Standard Charge Current | 12A (0.2C) |
| Maximum Charge Current | 30A (0.5C) @ 20~45°C |
| Standard Discharge Current | 12A (0.2C) |
| Maximum Discharge Current | 180A (3C) |
| Internal Impedance (AC 1kHz) | <2mΩ |
| Energy Density | >400Wh/kg |
| Weight | Approx. 640g |
| Dimensions (T*W*L) | ≤11.2*122*222 mm |
| Tab Width (Positive/Negative) | 30±0.1mm each |
| Tab Pitch | 55±1.0mm |
| Operating Temperature (Charge) | 0°C ~ 45°C |
| Operating Temperature (Discharge) | -20°C ~ 55°C |
| Shipping Voltage | 3.7 ~ 3.9V |
Electrochemical Performance
| Test Item | Standard | Test Condition |
|---|---|---|
| Initial Capacity | ≥59.5Ah | Standard charge + standard discharge at 25±2°C |
| Temperature Characteristics (55°C) | ≥90% of rated capacity | Standard charge, rest 2h at 55°C, discharge 12A to 2.5V |
| Temperature Characteristics (20°C) | ≥95% of rated capacity | Standard charge, rest 2h at 20°C, discharge 12A to 2.5V |
| Temperature Characteristics (-20°C) | ≥60% of rated capacity | Standard charge, rest 2h at -20°C, discharge 12A to 2.5V |
| Cycle Life (25±3°C) | ≥300 cycles to 80% initial capacity | 0.2C CC-CV charge to 4.25V, 0.03C cut-off; 0.2C discharge to 3.3V cut-off |
| Shelf Life (28 days at 25°C) | Retention ≥90%, Recovery ≥95% | Standard charge, store 28 days at 25°C, then standard discharge; recharge and discharge again |
| Shelf Life (7 days at 55°C) | Retention ≥75%, Recovery ≥80% | Standard charge, store 7 days at 55°C, then standard discharge; recharge and discharge again |
| Test | Requirement | Method |
|---|---|---|
| Vibration Test | No leakage, no explosion, no fire | Amplitude 0.8mm, 10~55Hz sweep 1Hz/min, X/Y/Z axes, 90~100min each |
| Drop Test | No explosion, no fire | 1.0m drop onto concrete with p-tile, X/Y/Z directions, 50% charge state |
Store the battery in a cool, dry environment within -20°C to +35°C for long-term storage (>6 months) and at 65±20% relative humidity. For optimum lifespan, activate the battery once every 3 months by charging at 0.2C to 4.25V, resting 10 minutes, discharging at 0.2C to 2.5V, resting 10 minutes, and finally charging at 0.2C to 3.85V. Always insulate terminals with tape before disposal to prevent fire hazards.
- Do not immerse in water, expose to fire, or place near heat sources above 60°C
- Use only designated Li-ion battery chargers and never reverse polarity
- Avoid short-circuiting, crushing, dropping, or puncturing the cell
- Do not disassemble or modify the battery; replacement must be performed by qualified personnel
- Keep away from children and strong electrostatic or magnetic fields
- If electrolyte contacts eyes, rinse immediately with clean water and seek medical attention
- Discontinue use if the battery shows swelling, odor, discoloration, or abnormal heat
Our products are sold all over the world, you can rest assured.
