Custom Drone Battery Pack Solution — 22000mAh 7C LiPo UAV Cell for Heavy-Lift Platforms
-
Nominal Capacity22000mAh
-
Nominal Voltage3.7V
-
Continuous Discharge7C (154A)
-
Peak Pulse Discharge10C ≤3 Seconds
-
Energy Density≥280 Wh/kg
-
Internal Impedance≤1.0 MΩ
-
Cycle Life At 0.5C≥800 Cycles
-
Weight~294 G
-
Place of OriginChina
-
Brand NameOiD
-
CertificationIEC 62133,UN38.3, MSDS
-
Model NumberOID1087187SS30AH
-
Minimum Order Quantity1pcs
-
Price$0.5 ~ $200.0 / pcs
-
Packaging DetailsCarton
-
Delivery Time3 ~ 30 days for storage
-
Payment TermsL/C,D/A,D/P,T/T
-
Supply Ability1000000
Custom Drone Battery Pack Solution — 22000mAh 7C LiPo UAV Cell for Heavy-Lift Platforms
UAV developers sourcing a custom drone battery pack need a cell that combines burst current, flat voltage delivery and low mass. The OID1087187SS30AH LiPo cell is built for that brief, giving platform designers a 22000mAh building block for high-discharge drone battery packs.
Its 7C continuous discharge (154A) and 10C pulse capability suit propulsion loads found in heavy-lift UAVs, agricultural sprayers, inspection aircraft and mapping platforms.
At ≥280Wh/kg, the cell helps extend flight time without adding battery weight, a key trade-off when configuring custom drone battery packs for payload-sensitive airframes.
Manufacturer: Shenzhen Jianheng Technology Co Ltd.
| Parameter | Specification |
|---|---|
| Model | OID1072170LP22AH |
| Nominal Capacity | 22000mAh |
| Minimum Capacity | 21000mAh |
| Nominal Voltage | 3.7V |
| Full Charge Voltage | 4.2V |
| Standard Charge | 0.5C CC/CV |
| Fast Charge | 1C |
| Super Fast Charge | 2C |
| Standard Discharge | 0.5C (11A) |
| Continuous Discharge | 7C (154A) |
| Peak Pulse Discharge | 10C ≤3 seconds |
| Cut-off Voltage | 2.8V |
| Internal Impedance | ≤1.0 mΩ |
| Weight | ~294 g |
| Energy Density | ≥280 Wh/kg |
| Volumetric Density | ≥645 Wh/L |
Takeoff and aggressive maneuvering create short, heavy current draws. This cell sustains 7C continuous and 10C pulse discharge, keeping voltage stable for high-power drone motors.
With ≤1.0 mΩ AC impedance, the cell delivers:
- steady voltage under high current load
- lower heat build-up
- better energy efficiency
Low impedance is central to longer flight time and safer high-power operation.
≥280Wh/kg gravimetric energy density lets drone designers achieve:
- lighter battery packs
- longer flight endurance
- more payload capacity
| Discharge Rate | Cycle Life |
|---|---|
| 0.5C | ≥800 cycles |
| 3C | ≥500 cycles |
| 5C | ≥300 cycles |
The cell maintains dependable long-term operation across discharge conditions:
Capacity retention stays ≥80% at end of life under standard testing conditions.
| Discharge Rate | Capacity Retention |
|---|---|
| 0.5C | ≥98% |
| 3C | ≥98% |
| 7C | ≥90% |
Testing procedure: Standard full charge → rest 5 minutes → constant current discharge to cut-off voltage.
| Temperature | Capacity Retention |
|---|---|
| 40°C | ≥90% |
| 25°C | 100% |
| 0°C | ≥85% |
| -10°C | ≥70% |
This behavior supports drone operation in cold environments and high-temperature outdoor conditions.
- Frequency range: 10Hz – 55Hz
- Amplitude: 1.6 mm
- Duration: 30 minutes per axis (X/Y/Z)
Result: No explosion, no fire, no leakage.
- Drop height: 1.2 meters
- Surface: 30 mm wooden board
- Impact directions: random
Result: No explosion, no fire, no leakage.
| Parameter | Value |
|---|---|
| Thickness | 10.3 ±0.3 mm |
| Width | 72.0 ±1.0 mm |
| Length | 170.0 ±2.0 mm |
| Weight | ~294 g |
| Condition | Range |
|---|---|
| Charging | 0°C – 45°C |
| Discharging | -20°C – 60°C |
Recommended shipping voltage: 3.5V – 3.6V per cell.
Professional UAV propulsion systems typically require 5C–10C discharge capability to support high current demand during takeoff and maneuvering. This battery supports 7C continuous discharge and 10C pulse output, making it suitable for heavy-lift and industrial drones.
Low internal resistance reduces voltage drop when high current flows through the battery. A battery with ≤1mΩ impedance can deliver more stable power output and generate less heat, improving drone flight efficiency and safety.
Energy density determines how much energy a battery can store per unit weight. Higher energy density allows drone manufacturers to increase flight duration without increasing battery weight, which is essential for payload-sensitive UAV designs.
Industrial drones usually require batteries with 500–800 cycle life depending on discharge rate and operational conditions. This cell provides ≥800 cycles under standard conditions, supporting long-term commercial drone operations.
Outdoor drones may operate in cold or hot environments. A reliable drone battery should support at least -10°C to 40°C operational conditions, with broader discharge ranges for extreme climates. This battery supports -20°C to 60°C discharge temperature range.
Shenzhen Jianheng Technology Co Ltd Professional lithium battery cell and battery pack solution provider for industrial applications.
Support available for:
- UAV battery pack design
- custom lithium battery integration
- high-discharge battery systems
For optimal battery lifespan:
- Storage temperature: 0°C – 35°C
- Humidity: ≤75% RH
- Long-term storage voltage: 3.7V – 3.9V
For batteries stored long term, it is recommended to activate the cell every 3 months by performing a charge-discharge cycle.
To ensure safe use:
Do NOT
- expose the battery to open flames
- puncture or damage the battery casing
- disassemble the battery
- mix cells with different models or brands
Immediately stop using the battery if:
- swelling occurs
- deformation is observed
- electrolyte leakage appears
Only chargers designed for Li-Polymer batteries should be used.
This high-performance drone battery cell is suitable for:
- agricultural spraying drones
- industrial inspection UAVs
- mapping and surveying drones
- logistics and delivery drones
- heavy-lift UAV platforms
Our products are sold all over the world, you can rest assured.