Custom Drone Battery Pack 22.2V 30Ah 6S 300A Semi Solid State Power for Industrial UAVs

This OID9590190SS-5C-22.2V custom drone battery pack is built for professional UAV platforms that need long endurance and high burst current. As a 30Ah 22.2V semi solid state Drone Battery in a 6S configuration, it supports up to 300A burst discharge for demanding industrial UAV operations.

• Elevated energy density: About 320 Wh/kg helps extend flight windows while keeping pack mass controlled.
• Strong discharge capability: 5C continuous discharge at 150A and 10C burst at 300A handle high-power motors and fast load changes.
• Semi solid state design: Semi solid state electrolyte construction improves thermal stability safety and energy density.
• Dependable cycle life: Tested cycle life reaches ≥300 cycles with ≥80% capacity retention under standard conditions.

Each pack is manufactured under controlled processes and undergoes performance testing. The 22.2V 30Ah setup targets long-endurance UAV platforms where weight efficiency and peak power both matter. As an experienced drone battery manufacturer, we provide B2B buyers with stable quality and technical documentation.

Capacity remains stable during high-rate discharge. Cycle-life evaluation uses 1C charge, 3C discharge and a 30-minute rest between cycles, reaching ≥300 cycles with ≥80% remaining capacity. Tests are conducted under controlled laboratory conditions at 23 ±2°C, 45–65% RH and 86–106 kPa, using AC impedance testing, precision battery test systems, high-accuracy multimeters and temperature measurement instruments.

Standard charging applies 0.5C constant current–constant voltage (CC-CV) up to 25.2V with a 0.02C cut-off current. Standard discharge uses 0.5C constant current to 15.0V.

Shenzhen Jianheng Technology Co., Ltd manufactures lithium battery cells and customized battery packs for UAV robotics and industrial applications. As a trusted drone battery manufacturer, the company emphasizes semi solid state technology, safety standards and rigorous testing to support global B2B procurement.

• Industrial inspection UAVs
• Agricultural spraying and mapping drones
• Surveying and reconnaissance aircraft
• Logistics and cargo drones
• Long-endurance UAV platforms

Passed comprehensive safety tests including:

• Short circuit test

• Overcharge test

• Forced discharge test

• Drop test

• Vibration test

• High temperature and humidity test

The drone battery pack passes the following safety validation tests:

These tests ensure stable and safe operation for UAV systems.

Recommended storage conditions:

For long-term storage, recharge every 3 months.

For safe operation:

• Use only specified chargers

• Do not short circuit terminals

• Do not expose to fire or high temperature

• Do not disassemble the battery pack

• Do not immerse in water

• Stop use immediately if overheating, odor, deformation, or discoloration occurs

If battery voltage drops below 15.0V, the pack must be scrapped to avoid safety risks.