Custom Drone Battery Pack OID 16000mAh 22.8V 15C 6S1P UAV LiPo

Designed for commercial UAV platforms, the OID6477196-16000mAh-22.8V-15C Drone Battery uses a high voltage LiPo approach and a 6S1P layout to support demanding flight profiles. As a custom drone battery pack, it is assembled under controlled processes by Shenzhen Jianheng Technology Co Ltd to provide repeatable high-rate output and dependable pack consistency for professional operators.

• Stable high-rate platform: the pack supports 15C continuous discharge with a 50A maximum constant current and burst capability up to 100A; high rate discharge at 100A reaches ≥5.4 minutes to 19.2V.
• Low-loss pack construction: internal impedance of ≤9mΩ at AC 1kHz helps limit heat buildup and sends more usable energy toward the propulsion system.
• High voltage chemistry: nominal voltage is 22.8V at 3.8V per cell; max charge voltage is 26.1V at 4.35V per cell; discharge cut-off is 19.2V at 3.2V per cell.
• Capacity and cycle reliability: nominal capacity is 16000mAh at 0.2C discharge and minimum capacity is 15582mAh; cycle life is ≥300 cycles to 80% initial capacity under 0.2C charge/discharge. Charging covers standard 5A at 0.2C, rapid 10A at 0.6C, and charge cut-off at 26.1V CC/CV with tail current 0.02C.
• Shipment voltage control: packs are stabilized between 22.5~23.1V for storage and transport, with the 23.1v upper value checked before dispatch; long-term storage voltage range is 21.6V ~ 23.4V.
• Pack format and operating range: dimensions are 64*77.5*196mm max, weight is approx. 1780g, configuration is 6S1P (6 cells in series 1 parallel), and discharge operating temperature is -20°C to 60°C. High temperature storage recovery is ≥95%. Certifications include UN38.3 and MSDS.

Model OID6477196-16000mAh-22.8V-15C uses a 6S1P layout with 16000mAh nominal capacity at 0.2C discharge and 15582mAh minimum capacity. Nominal voltage is 22.8V at 3.8V per cell; max charge voltage is 26.1V at 4.35V per cell; discharge cut-off is 19.2V at 3.2V per cell. Internal impedance is ≤9mΩ at AC 1kHz. Max constant discharge current is 50A, and high rate discharge at 100A lasts ≥5.4 minutes to 19.2V. Standard charge is 5A at 0.2C, rapid charge is 10A at 0.6C, and charge cut-off is 26.1V CC/CV with tail current 0.02C. Cycle life is ≥300 cycles to 80% initial capacity at 0.2C charge/discharge. Dimensions are 64*77.5*196mm max and weight is approx. 1780g. Discharge operating temperature is -20°C to 60°C; long-term storage voltage range is 21.6V ~ 23.4V. Shipping stabilization is 22.5~23.1V, including the 23.1v upper value.

Shenzhen Jianheng Technology Co Ltd concentrates on high-performance power for unmanned systems, and each OID Drone Battery is built around Grepow cells (GRPA175175-15C) with precise assembly for commercial UAV use. Quality control covers 100% inspection of dimensions, open-circuit voltage, and internal resistance before shipment, backed by responsive technical support for custom drone battery pack projects.

• Always charge with a LiPo-compatible charger set to 6S (22.8V nominal / 26.1V max) and never exceed 26.1V.
• Do not discharge below 19.2V to prevent irreversible capacity loss.
• Store batteries at 21.6V~23.4V in a cool dry place (-20°C~35°C) for extended periods. Activate every 3 months with one full charge-discharge cycle.
• Inspect battery for any physical damage before each use. Do not use if the aluminum foil packaging is punctured or swollen.
• Never reverse polarity or short circuit the battery terminals.

• Professional UAV drones (agriculture, mapping, surveillance, inspection)
• FPV racing drones requiring high burst current
• Industrial robotics and portable power systems
• High-drain R/C models and eVTOL prototypes

Contact Shenzhen Jianheng Technology Co Ltd for volume pricing and customized solutions. MOQ: 1 piece for sample testing. Supply ability: 10,000 units per month. Fast delivery from Shenzhen port.