High Discharge Drone Battery Pack 22.2V 30Ah Semi Solid State 6S 300A UAV Battery

The OID9590190SS-5C-22.2V semi solid state drone battery pack is engineered for professional UAV and drone platforms that demand high burst current and dependable energy delivery.

With approximately 320Wh/kg energy density, 150A continuous discharge and 300A burst output, this high discharge drone battery pack supports demanding flight profiles and rapid load changes in professional UAV operations.

Produced by Shenzhen Jianheng Technology Co., Ltd, the pack integrates semi-solid-state lithium technology with strict safety and performance testing for B2B UAV buyers.

An energy density of roughly 320 Wh/kg helps extend flight endurance compared with conventional lithium battery packs in the same class.

The pack delivers 5C continuous discharge (150A) and 10C burst discharge (300A), making it suitable for high-power drone motors and sudden current demands.

The semi-solid electrolyte design contributes to improved thermal stability, safety performance and energy density in UAV battery applications.

Under standard test conditions, the battery achieves ≥300 cycles with ≥80% capacity retention for reliable long-term use.

Capacity retention remains strong across high-rate discharge conditions, supporting consistent UAV power output.

Test Condition:

• 1C charge

• 3C discharge

• 30 min rest between cycles

Result: ≥300 cycles with ≥80% remaining capacity

All tests are conducted under controlled laboratory conditions:

• Temperature: 23 ±2°C

• Humidity: 45–65% RH

• Pressure: 86–106 kPa

Testing equipment includes:

• AC impedance tester (1kHz LCR method)

• Precision battery test system

• High-accuracy multimeter

• Temperature measurement instruments

0.5C constant current–constant voltage (CC-CV) charging to 25.2V, cut-off current 0.02C.

0.5C constant current discharge to 15.0V.

Shenzhen Jianheng Technology Co., Ltd

Professional manufacturer of lithium battery cells and customized battery packs, providing high-performance energy solutions for UAV, robotics, and industrial applications.

Passed comprehensive safety tests including:

• Short circuit test

• Overcharge test

• Forced discharge test

• Drop test

• Vibration test

• High temperature and humidity test

The drone battery pack passes the following safety validation tests:

These tests ensure stable and safe operation for UAV systems.

Recommended storage conditions:

For long-term storage, recharge every 3 months.

For safe operation:

• Use only specified chargers

• Do not short circuit terminals

• Do not expose to fire or high temperature

• Do not disassemble the battery pack

• Do not immerse in water

• Stop use immediately if overheating, odor, deformation, or discoloration occurs

If battery voltage drops below 15.0V, the pack must be scrapped to avoid safety risks.

This semi solid state drone battery pack is suitable for:

• Industrial UAVs

• Agricultural drones

• Surveying drones

• Logistics drones

• Long endurance UAV platforms