For UAV programs buying lithium polymer drone batteries in volume, model OID105230-20000mAh-3.8V-15C is a high-current Li-Po platform intended for industrial UAVs, fast FPV airframes, and agricultural drones. Jianheng builds this Drone Battery pack to keep voltage stable under heavy loads, extend service life, and cut turnaround time between missions. As a direct drone battery manufacturer, we support volume orders with repeatable cell quality and documented safety compliance.
The pack delivers 10C continuous discharge at 200A plus 15C pulse capability at 300A for 5 seconds. That combination supports aggressive throttle changes and heavy-lift maneuvers while limiting voltage sag. For procurement teams evaluating wholesale Drone Battery suppliers, this model pairs verified performance figures with UN38.3 and MSDS certification for global transport.
At 25±2°C, laboratory testing indicates the OID pack supplies at least 98% of rated capacity at 0.2C and at least 90% at 10C discharge. Internal impedance is ≤1.0mΩ, a low reading for a 20000mAh pouch cell that helps curb heat buildup and route more energy to the motors. Across 1000 charge-discharge cycles using 5C charge and 10C discharge to a 3.3V cut-off, capacity retention remains at or above 80%, reducing total cost of ownership over repeated flight campaigns.
Recharge windows are often tight in commercial drone operations. This battery accepts 5C super fast charging at 100A, so an empty-to-full charge can be completed in approximately 12 minutes under suitable conditions. Its 4.35V high-voltage chemistry helps achieve a weight energy density of 200Wh/kg and a volumetric energy density of 425Wh/L, giving operators more flight time per gram of battery weight.
| Parameter | Value |
|---|---|
| Nominal Capacity | 20000mAh (0.2C discharge) |
| Minimum Capacity | 19600mAh |
| Nominal Voltage | 3.8V |
| Full Charge Voltage | 4.35V |
| Standard Charge | 0.5C (10A) CC/CV to 4.35V, cut-off 0.05C |
| Fast Charge | 4C (80A) |
| Super Fast Charge | 5C (100A) |
| Continuous Discharge (Rate) | 10C (200A) |
| Pulse Discharge (15C) | 300A ≤5 seconds |
| Cut-off Voltage | 3.0V |
| Internal Impedance | ≤1.0mΩ |
| Dimensions (T*W*L) | 7.0±0.3mm * 105.0±2.0mm * 228.0±2.0mm |
| Weight | 380g±10g |
| Weight Energy Density | ≥200Wh/kg |
| Volume Energy Density | ≥425Wh/L |
| Operating Temp (Charge) | 0°C to 45°C |
| Operating Temp (Discharge) | -20°C to 55°C |
| Cycle Life (≥80% retained) | ≥1000 cycles |
The OID battery is built with strict safety protections. It passes vibration testing (10Hz-55Hz, 0.38-0.19mm amplitude, no fire, no explosion, no leakage) and 1-meter drop testing onto hardwood. The cell is UN38.3 certified for air transport and comes with MSDS documentation. Over-charge, over-discharge, short circuit, and reverse polarity are strictly prohibited by design – but even in extreme misuse, the robust construction minimizes risks.
Jianheng (Shenzhen Jianheng Technology Co Ltd) specializes in high-power lithium batteries. This OID105230 cell has been adopted by agricultural spraying drones, search & rescue UAVs, and competitive RC racing teams. The aluminum tab (positive) and nickel-plated copper tab (negative) ensure low contact resistance and easy soldering or spot welding.
Each cell is shipped at 3.8V-3.85V (approximately 30-60% state of charge) for safe transport and extended shelf life. Store at 0°C~35°C, ≤75% RH. For long-term storage (>1 month), keep voltage between 3.7V and 3.9V.