The OID EP9787187 is a 51.8V Lithium Polymer (Li-Po) battery pack built for high-current professional applications. A 27000mAh nominal capacity and 14S1P configuration support reliable power delivery for demanding drone, robotics, and industrial equipment projects. Shenzhen Jianheng Technology Co., Ltd. manufactures this model under strict quality controls for professional buyers.
| Parameter | Specification |
|---|---|
| Nominal Voltage | 51.8V |
| Full Charge Voltage | 58.8V |
| Cut-off Voltage | 49.2V |
| Standard Charge Current | 0.5C (13.5A) |
| Fast Charge Current | 1C (27A) |
| SuperFast Charge Current | 2C (54A) |
| Standard Discharge Current | 0.5C (13.5A) |
| Continuous Discharge Current | 5C (135A) for 30 seconds |
| Pulse Discharge Current | 10C (270A) for 3 seconds |
| Internal Impedance (AC) | ≤14.0mΩ |
| Weight | ~5420g |
Use only a charger designed for a 14S (51.8V) Lithium Polymer battery. Standard charging applies 0.5C constant current up to 58.8V, then constant voltage until current falls to ≤0.05C. For faster charging, 1C or 2C current may be used, though cycle life may be slightly reduced.
Under standard charge/discharge conditions of 0.5C charge and 0.5C discharge at 25℃, the battery is expected to retain ≥80% of initial capacity after 300 cycles.
For long-term storage, keep voltage between 49.2V and 50.4V (approximately 40%-50% charge) in a cool dry place at 0℃-35℃ and ≤75% RH. Do not store above 50.4V for more than 7 days. Activate the battery every 3 months.
Jianheng offers a 12-month warranty from the shipment date, provided the battery is within its cycle life and used according to specifications. Warranty exclusions are detailed in the full specification.
This 51.8V 27000mAh Li-Po battery pack is ideal for high-drain applications such as industrial drones, large-scale UAVs, robotics, electric vehicles, and high-power portable equipment where high energy density and high discharge rates are critical.
Never expose the battery to open flames, high temperatures, or puncture it. Do not disassemble or mix with other battery types. Always charge in a non-humid environment and stop using immediately if the battery shows signs of swelling, deformation, or leakage.
Yes. The battery is shipped at a safe voltage between 49.2V and 50.4V (40%-50% charge) in compliance with transportation regulations for lithium batteries.
Manufactured under strict quality control by Shenzhen Jianheng Technology Co., Ltd., this battery meets rigorous safety standards. It is designed with built-in protections against overcharge, over-discharge, and short circuits when used with a compatible Battery Management System (BMS).